Other 28" to 24" paper cutters
Challenge Titan 265 TC
Baum Cut 26.4
MBM Triumph 6660
MBM Triumph 6655
Standard Horizon APC-610
Standard Horizon PC-640
data subject to change without notice
  • overview
  • specs
  • brochure

MBM Triumph 7260

The MBM Triumph 7260 is a 28 inch programmable cutter with hydraulic knife, hydraulice clamp, power back gauge, electronic control module, and IR safety light beams on front table.

The MBM Triumph 7260 has the following features:

Comprehensive SCS safety package: patented EASY CUT electronic blade activation bars for true two-hand operation; IR light beam safety curtain on front table; safety cover on rear table; main switch and safety lock with key; 24 volt controls (low voltage); automatic blade and clamp return from every position; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.

Hydraulic knife and clamp drive. Foot pedal for pre-clamping.

Electric back gauge drive with control module for easy programming. Push buttons for fast back gauge movement (forward and reverse). Electronic hand wheel with variable speed control for manual back gauge setting.

Digital measurement display (cm or inches) with multilingual operator guidance, accurate to 1/10 mm or 1/100 inch. Stores 99 programs with up to 99 steps in each (up to 9 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes. Memory keys for repeat cuts (manual) and quick setting of frequently needed measurements. Automatic SET function for reference measurement and paper EJECT function with and without program mode. DELETE and INSERT mode for correcting and modifying programs. Automatic correction in case of back gauge displacement.

Integrated calculator. Self-diagnostic system with error indication on display. Electric blade drive with solid steel carrier and adjustable guides. Clamp pressure is fully adjustable between 550 and 4,400 psi. False clamp plate with optical indicator. Bright, LED optical cutting line. Stainless steel work surface. Standard air tables (front and rear). High quality, German HSS blade. Precision swing cut blade movement. All-metal construction.

Includes easy-access tool holder and paper blocking tool. Optional side tables increase work surface. UL and C UL approved.


Maximum Cutting Width: 28"
Minimum Cut: without false clamp plate 3/4"
                          with false clamp plate 3-1/2"
Maximum Cut Depth: 28"
Clamp Opening 3"
Cutting Method Hydraulic
Clamping Method Hydraulic and Manual
Backgauge Control Electronic


Overall Height 52-1/2"
Overall Width 51-3/8"
Overall Length 60-1/2"
Shipping Weight (approximate) 1,534 lbs.


2 HP - 220 VAC 3-phase

U.L. Listed

MBM 7260 brochure pdf file

Download the brochure and call 877.460.1212 toll free to speak to a sales representative.