Other hydraulic paper drills

Baum D5 ST 5-Spindle
Baum D3 HD 3-Spindle
Challenge MS-5 Multi-Spindle
Challenge EH-3 Three-Spindle
   
   
   
   
data subject to change without notice
  • overview
  • specs
  • brochure

Challenge MS-10A Multi-Spindle Drill


      - High Production Multi-Hole Drilling
      - Drills Up To 10 Holes in One Stroke
      - Maximum Drill Bit Diameter 1/2"
      - 2-1/2" Drilling Capacity
      - Powerful Hydraulic Operation
      - Easy Head Adjustment
      - Variable Speed Stroke Control
      - Automatic Paper Chip Removal
      - Rugged Cast Iron Construction
      - Flexible Side Guide Adjustments
      - Multi-Splined Drive Shaft
      - Backgauge Adjustments
      - Lighted Work Surface


Specifications

Maximum Number of Drill Heads 10 Heads
Drill Sizes Available** (2" capacity) 1/8" to 1/2" / 3 to 13 mm
Drill Sizes Available (2-1/2" capacity) 1/4" to 1/2" / 6 to 13 mm
Center to Center Distance Maximum 21" / 53 cm
Center to Center Distance Minimum*** 1-1/4" / 3.2 cm
Minimum Distance Between Holes w/ Adj. Stops 3/8" / 9.5 mm
Minimum Distance Between Holes w/ Fixed Gauges 1/4" / 6 mm
Maximum Drilling Capacity 2-1/2" / 6.35 cm
Strokes per Minute (adjustable) 18 to 26
Backgauge Adjustment 0 to 9" / 0 to 23 cm
Vertical Adjustment of Individual Heads 1/4" / 6 mm

Dimensions

Table Size 24" x 36" / 61 x 91 cm
Table Height 38" / 96.5 cm
Overall Height 60" / 152 cm
Floor Space Needed 35" x 40" / 89 x 102 cm
Net Weight (approximate) 1350 lbs / 675 kg
Shipping Weight (approximate) 1660 lbs / 830 kg

Electrical

Standard -

3 Phase, 60 Hz, AC. Pump: 3/4 HP.  Spindle Motor: 3 HP.
208 Volts, 14 Amps (service size 20 Amps) or
230 Volts, 12.8 Amps (service size 20 Amps) or
460 Volts, 6.6 Amps (service size 15 Amps)

Optional -

1 Phase, 60 Hz, AC. Pump: 3/4 HP.  Spindle Motor: 3 HP
208 Volts, 26.5 Amps (service size 40 Amps) or
230 Volts, 24.2 Amps (service size 40 Amps)

Challenge reserves the right to make changes to any product or specification without notice and without incurring responsibility to existing units.
** Special large hole drilling (up to 1-3/4" in diameter) is possible with conversion kit.
*** Three hole drilling heads are available for drilling 3 holes in 1" centers.

Challenge MS-10A brochure pdf file

Download the brochure and call 877.460.1212 toll free to speak to a sales representative.