MBM Triumph 6660

MBM Triumph 6660 Cutter - available with VRCut

 

The Triumph 6660 is a programmable cutter with automatic clamp, power back gauge, digital touchpad, and IR safety light beams on front table.

The patented EASY CUT electronic blade activation bars for true two-hand operation; IR light beam safety curtain on front table; safety cover on rear table; main switch and safety lock with key; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; disc brake for instant blade stop; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine; blade and cutting stick can be changed without removing covers.

The available VRCut solution consists of two independent modules that work together. The Impose module creates PDF documents formatted specifically to work with the VRCut Controller module. The Controller module connects directly to the Triumph cutter moving the backgauge and visually guiding operators through the cutting sequence.

Video
Features

IR Safety Curtain

IR light beam safety curtain covers work area to ensure the highest level of operator safety.

Electronic Handwheel

The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.

Easy Cut Blade Activation Bars

Patented EASY CUT blade activation bars ensure true, two-handed operation and allow blade and clamp to be activated independently.

Easy to Use Touchpad

The programmable control module is equipped with a multilingual touchpad for easy operation. 99 programs with 99 steps in each can be stored in memory.

Tool Holder

Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.

Safe Blade Changes

Blade changes can be made without removing machine covers. Handy blade changing device covers the cutting edge of blade.

Specifications

Specifications

Cutting Width: Up to 25.5″ / Cutting Height: Up to 3″ / Cutting Depth: 1″ to 24″

Dimensions

Machine Size: 48″ D x 39″ W x 51″ H / Shipping Weight: 775 lbs.

Electrical

2 HP, 115 VAC 60 Hz (20 Amp dedicated line required)