RMGT 1020TP/1050TP Offset Presses
The RMGT 1020TP/1050TP is a unique tandem perfector press on which the reverse-side printing units are connected to a straight printing press via a special translink unit.
After printing the reverse side, the front side is printed without the need to reverse the printed sheets, eliminating various limitations typically associated with perfecting.
This also makes it possible to perform perfecting on heavy stock.
UV perfecting is also possible by equipping the translink unit with a UV curing unit, providing high-grade printing with no difference in printing quality between the front and reverse sides.
- Special translink unit smoothly transfers sheets from the reverse-side printing units to the front-side printing units without turning the sheets over.
- Sheet transfer is performed without changing the gripping side, so plate making position is the same for the front and reverse sides.
- Virtually no fan-out, so front and reverse register precision is comparable to that on a straight press.
- Configuration can be freely selected from among 1 to 5 reverse-side printing units and 1 to 5 front-side printing units according the job requirements.
- Parallel processing of printing procedure shortens make-ready time approximately 20-40% compapred to previous presses.
Specifications
Due to the variety of presses in this series available, click on the brochure link near the top of this page.
Dimensions
Due to the variety of presses in this series available, click on the brochure link near the top of this page.
Electrical
Due to the variety of presses in this series available, click on the brochure link near the top of this page.