Standard Horizon HT-110 Three-Knife Trimmer
The Standard Horizon HT-110 is an automated three-knife trimmer, with a user-friendly 10.4″ color touchscreen control console.
The trimmer is simple and easy to operate, with all necessary settings performed through the icon-based touchscreen.
The HT-110 can run at speeds up to 1,600 cycles per hour, and by accumulating up to 3 books at once at the stream stack orientator, production of up to 4,000 books per hour can be achieved.
For off-line or in-line operation.
Touchscreen Operation
The trimmer is simple and easy to operate, with all necessary settings performed through the large, icon based color touchscreen. If the system has an error, the error type and location are indicated for quick resolution.
In-feed section
A pressing unit in the in-feed section compresses the books to remove air for reduced bulk and accurate trimming.
Trimming section
The height of each knife and the angle of the fore-edge knife can be adjusted through the color touch screen during operation. Trimmings are blown away from the knife by strong air nozzles mounted on the knife holders
Chip extractor (TB-100)
The three-knife trimming waste is extracted by the optional chip extractor.
Chuck plate recognition device
LED lamps light up to indicate which chuck plate is suitable for each book size. Replacement of the chuck plate is fast and easy.
Specifications
Untrimmed Book Size (Spine x Fore-edge): 5.83″ x 4.14″ to 16.14″ x 12.59″ / Finished Book Size (Spine x Fore-edge): 5.71″ x 4.05″ to 14.40″ x 11.81″ / Trim Width: Fore-edge 1.77″, Top-Bottom 1.18″ / Trim Height: 0.079″ to 3.93″ / Production Speed: 400 to 1,600 cycles per hour
Dimensions
Size of main body: 84.7" D x 76.8" W x 76.8" H / Weight: TBA
Electrical
200-230 VAC 3-phase 60 Hz
Compressed Air Required
? cfm at 125 psi